Special threads
We deliver lifting points with special threads to meet customer requirements. We manufacture metric, inch or pipe threads, in millimeters or inches, dense or normal threads.
Delivery time is normally 6-8 days from order (+ freight).
Thread chart, Metric threads
| Size | Nominal diam (mm) | Distance between 2 threads Standard Thread pitch | Distance between 2 threads Fine Thread pitch |
|||
|---|---|---|---|---|---|---|
| M 4 | 4 | 0,7 | 0,5 | |||
| M 5 | 5 | 0,8 | 0,5 | |||
| M 6 | 6 | 1 | 0,75 | |||
| M 7 | 7 | 1 | 0,75 | |||
| M 8 | 8 | 1,25 | 1 | 0,75 | ||
| M 9 | 9 | 1,25 | 1 | 0,75 | ||
| M 10 | 10 | 1,5 | 1,25 | 1 | 0,75 | |
| M 11 | 11 | 1,5 | 1 | 0,75 | ||
| M 12 | 12 | 1,75 | 1,5 | 1,25 | 1 | |
| M 14 | 14 | 2 | 1,5 | 1,25 | 1 | |
| M 15 | 15 | 1,5 | 1 | |||
| M 16 | 16 | 2 | 1,5 | 1 | ||
| M 17 | 17 | 1,5 | 1 | |||
| M 18 | 18 | 2,5 | 2 | 1,5 | 1 | |
| M 20 | 20 | 2,5 | 2 | 1,5 | 1 | |
| M 22 | 22 | 2,5 | 2 | 1,5 | 1 | |
| M 24 | 24 | 3 | 2 | 1,5 | 1 | |
| M 25 | 25 | 2 | 1,5 | 1 | ||
| M 27 | 27 | 3 | 2 | 1,5 | 1 | |
| M 28 | 28 | 2 | 1,5 | 1 | ||
| M 30 | 30 | 3,5 | 3 | 2 | 1,5 | |
| M 32 | 32 | 2 | 1,5 | |||
| M 33 | 33 | 3,5 | 3 | 2 | 1,5 | |
| M 35 | 35 | 2 | 1,5 | |||
| M 36 | 36 | 4 | 3 | 2 | 1,5 | |
| M 39 | 39 | 4 | 3 | 2 | 1,5 | |
| M 40 | 40 | 3 | 2 | 1,5 | ||
| M 42 | 42 | 4,5 | 4 | 3 | 2 | 1,5 |
| M 45 | 45 | 4,5 | 4 | 3 | 2 | 1,5 |
| M 48 | 48 | 5 | 4 | 3 | 2 | 1,5 |
| M 50 | 50 | 3 | 2 | 1,5 | ||
| M 52 | 52 | 5 | 4 | 3 | 2 | 1,5 |
| M 55 | 55 | 4 | 3 | 2 | 1,5 | |
| M 56 | 56 | 5,5 | 4 | 3 | 2 | 1,5 |
| M 58 | 58 | 4 | 3 | 2 | 1,5 | |
| M 60 | 60 | 5,5 | 4 | 3 | 2 | 1,5 |
| M 62 | 62 | 4 | 3 | 2 | 1,5 | |
| M 64 | 64 | 6 | 4 | 3 | 2 | 1,5 |
| M 65 | 65 | 4 | 3 | 2 | 1,5 | |
| M 68 | 68 | 6 | 4 | 3 | 2 | 1,5 |
| M 70 | 70 | 6 | 4 | 3 | 2 | 1,5 |
| M 72 | 72 | 6 | 4 | 3 | 2 | 1,5 |
| M 75 | 75 | 6 | 4 | 3 | 2 | 1,5 |
| M 76 | 76 | 6 | 4 | 3 | 2 | 1,5 |
| M 80 | 80 | 6 | 4 | 3 | 2 | 1,5 |
| M 85 | 85 | 6 | 4 | 3 | 2 | |
| M 90 | 90 | 6 | 4 | 3 | 2 | |
| M 95 | 95 | 6 | 4 | 3 | 2 | |
| M 100 | 100 | 6 | 4 | 3 | 2 | |
Thread chart, other threads UNC, UNF, UNJF, BSW, BSF, 8 UN
| Size | Nominal Diameter Inch | Nominal Diameter mm | Number of threads per inch UNC | Number of threads per inch UNF | Number of threads per inch UNJF | Number of threads per inch BSW | Number of threads per inch BSF | Number of threads per inch 8 UN |
|---|---|---|---|---|---|---|---|---|
| 1/4” | 0,25 | 6,35 | 20 | 28 | 28 | 20 | 26 | |
| 9/32” | 0,28 | 7,14 | 26 | |||||
| 5/16” | 0,31 | 7,95 | 18 | 24 | 24 | 18 | 22 | |
| 3/8” | 0,38 | 9,56 | 16 | 24 | 24 | 16 | 20 | |
| 7/16” | 0,43 | 11,11 | 14 | 20 | 20 | 14 | 18 | |
| 1/2” | 0,5 | 12,7 | 13 | 20 | 20 | 12 | 16 | |
| 9/16” | 0,56 | 14,22 | 12 | 18 | 18 | 12 | 16 | |
| 5/8” | 0,63 | 15,88 | 11 | 18 | 18 | 11 | 14 | |
| 11/16” | 0,69 | 17,48 | 11 | 14 | ||||
| 3/4” | 0,75 | 19,05 | 10 | 16 | 16 | 10 | 12 | |
| 13/16” | 0,81 | 20,65 | 12 | |||||
| 7/8” | 0,88 | 22,23 | 9 | 14 | 14 | 9 | 11 | |
| 1” | 1 | 25,4 | 8 | joulu.14 | 12 | 8 | 10 | |
| 1 1/8” | 1,13 | 28,58 | 7 | 12 | 12 | 7 | 9 | 8 |
| 1 1/4” | 1,26 | 31,75 | 7 | 12 | 12 | 7 | 9 | 8 |
| 1 3/8” | 1,38 | 34,93 | 6 | 12 | 12 | 6 | 8 | 8 |
| 1 1/2” | 1,5 | 38,1 | 6 | 12 | 12 | 6 | 8 | 8 |
| 1 5/8” | 1,63 | 41,28 | 5 | 8 | 8 | |||
| 1 3/4” | 1,75 | 44,45 | 5 | 5 | 7 | 8 | ||
| 1 7/8” | 1,88 | 47,63 | 4,5 | 8 | ||||
| 2” | 2 | 50,8 | 4,5 | 4,5 | 7 | 8 | ||
| 2 1/4” | 2,25 | 57,15 | 4,5 | 4 | 6 | 8 | ||
| 2 1/2” | 2,5 | 63,5 | 4 | 4 | 6 | 8 | ||
| 2 3/4” | 2,75 | 69,85 | 4 | 3,5 | 6 | 8 | ||
| 3” | 3 | 76,2 | 4 | 3,5 | 5 | 8 | ||
| 3 1/4” | 3,25 | 82,55 | 4 | 3,25 | 5 | 8 | ||
| 3 1/2” | 3,5 | 88,9 | 4 | 3,25 | 4,5 | 8 | ||
| 3 3/4” | 3,75 | 92,25 | 4 | 3 | 4,5 | 8 | ||
| 4” | - | - | 4 | 3 | 4,5 | 8 |
Other available threads
Rd8, Rd9, Rd10, Rd11, Rd12, Rd14, Rd16, Rd18, Rd20, Rd22, Rd24, Rd26, Rd28, Rd30, Rd32, Rd34, Rd36, Rd38, Rd40, Rd42, Rd44, Rd46, Rd48, Rd50, Rd52, Rd55, Rd58, Rd60, Rd62.
1/16” G, 1/8” G, 1/4” G, 3/8” G, 1/2” G, 5/8” G, 3/4” G, 7/8” G, 1” G, 1 1/8” G, 1 1/4” G, 1 3/8” G, 1 1/2” G, 1 3/4” G, 1” G, 2 1/4” G, 2 1/2” G, 2 3/4” G, 3” G, 3 1/4” G, 3 1/2” G.
Long threads
We also deliver lifting points with an extra long thread. Either partially or fully threaded, according to the customer’s requirements.
Delivery time is normally 6-8 days from order (+ freight).
Extra long thread, metric
| Item | Max lenght | Thread | WLL | Safety Factor | ||
|---|---|---|---|---|---|---|
| L1 (mm) | Lenght | (t) | ||||
| FSEB M16 UP | 100 | 88 | 1,4 | 5 | ||
| FSEB M16 UP | 170 | 170 | 1,4 | 5 | ||
| FSEB M20 | 75 | 75 | 2,5 | 5 | ||
| FSEB M20 UP | 100 | 100 | 2 | 5 | ||
| FSEB M20 | 170 | 170 | 2,5 | 5 | ||
| FSEB M24 | 100 | 85 | 4 | 5 | ||
| FSEB M24 | 170 | 100 | 4 | 5 | ||
| FSEB M30 | 100 | 85 | 6,3 | 5 | ||
| FSEB M30 | 100 | 100 | 6,3 | 5 | ||
| FSEB M30 | 170 | 100 | 6,3 | 5 | ||
| FDSR M8 UP | 100 | 100 | 0,4 | 5 | ||
| FDSR M10 UP | 50 | 50 | 0,7 | 5 | ||
| FDSR M10 UP | 100 | 100 | 0,7 | 5 | ||
| FDSR M12 UP | 50 | 50 | 1,05 | 5 | ||
| FDSR M12 UP | 150 | 150 | 1,05 | 5 | ||
| FDSR M14 UP | 250 | 250 | 1,4 | 5 | ||
| FDSR M16 UP | 80 | 80 | 2 | 5 | ||
| FDSR M16 UP | 250 | 250 | 2 | 5 | ||
| FDSR M18 UP | 250 | 250 | 2,3 | 5 | ||
| FDSR M20 UP | 80 | 80 | 2,5 | 5 | ||
| FDSR M20 UP | 250 | 250 | 2,5 | 5 | ||
| FDSR M20 UP | 300 | 300 | 2,9 | 5 | ||
| FDSR M22 | 300 | 300 | 3 | 5 | ||
| FDSR M24 UP | 100 | 100 | 4,4 | 5 | ||
| FDSR M24 UP | 300 | 300 | 4,4 | 5 | ||
| FDSR M27 UP | 300 | 300 | 5,7 | 5 | ||
| FDSR M30 UP | 100 | 100 | 6 | 5 | ||
| FDSR M30 UP | 300 | 300 | 6 | 5 | ||
| FDSS M24 | 300 | 300 | 4,5 | 5 | ||
| FDSS M30 UP | 300 | 300 | 7,7 | 5 | ||
| FDSS M33 UP | 300 | 300 | 8,5 | 5 | ||
| FDSS M36 UP | 300 | 300 | 11 | 5 | ||
| FDSS M39 UP | 300 | 300 | 12 | 5 | ||
| FDSS M42 UP | 300 | 300 | 13 | 5 | ||
| FDSS M45 UP | 300 | 300 | 14,5 | 5 | ||
| FDSS M48 UP | 400 | 400 | 17 | 5 | ||
| FDSS M52 UP | 400 | 400 | 19 | 5 | ||
| FDSS M56 UP | 400 | 400 | 22 | 5 | ||
| FDSS M64 UP | 300 | 300 | 25 | 5 | ||
| FDSS M64 UP | 500 | 500 | 25 | 5 |
Extra long thread, UNC
| Item | Max thread | Max thread | WLL | Safety Factor |
|---|---|---|---|---|
| Lenght L1 (inch) | Lenght L1 (mm) | (lbs) | ||
| DSR 3/8'' 16 UNC | 8” | 203 | 1,3 | 5 |
| DSR 1/2'' 13 UNC | 8” | 203 | 2,4 | 5 |
| DSR 5/8'' 11UNC | 8” | 203 | 3,9 | 5 |
| DSR 3/4'' 10 UNC | 10” | 254 | 5,25 | 5 |
| DSS 1'' 8 UNC | 12” | 304 | 10 | 5 |
| DSS 1''1/4 7 UNC | 12” | 304 | 15 | 5 |
| DSS 1''1/2 6 UNC | 12” | 304 | 22 | 5 |
Lifting point for oversized through hole
The double centering system allows the lifting ring to be fixed through a flat hole and guarantees the complete stability of the ring with the part being lifted.
Delivery time is normally 6-8 days from order (+ freight).
Lifting point for oversized bolt
Using an adapter type lifting point is similar to using a nut type lifting nut. However, the adapter-type lifting ring is specially designed for a threaded hole with a large diameter and a small lifting load.
Delivery time is normally 6-8 days from order (+ freight).
Thread adapter
The thread adapter allows the use of a lifting ring when the thread size needs to be changed.
Delivery time is normally 6-8 days from order (+ freight).
Lifting point with spacer
Does the shackle have to be detached from the part to be lifted? A lifting ring with a spacer is the ideal solution when the geometry of the part to be lifted prevents the strap from moving correctly.
Delivery time is normally 6-8 days from order (+ freight).
Engravings
Each lifting point is engraved with a unique traceability number, WLL and tightening torque. In addition to these, we can offer engravings according to the customer’s wishes.
Engraving requests must be stated when ordering.
Special colors
We supply lifting points with various surface treatments according to the customer’s wishes. The lifting bracket’s desired color and color code must be stated when placing an order.
Available surface treatments: black/white zinc plating – yellow bichromate zinc plating – specific paint – nickel plating. Other surface treatments available on request.
We offer a whole range of different solutions designed for the specific needs of lifting brackets.